Inventory Note: A significant material shortage has disrupted the availability of US-made Gas Tubes over the last couple months. We are catching up on all sizes, but some remain on backorder status. If the size you need is backordered, please know that the straight Gas Tubes required for your Riflespeed Gas Control are not proprietary or unique. Straight Gas Tubes are available from several online sources. As long as you purchase the appropriate length for your carbine, straight Gas Tubes from other sources will work just fine.
A high-quality gas tube is a must to keep your rifle running perfectly. Choose a RIFLESPEED premium-quality
straight gas tube for use with the innovative line of
Riflespeed Gas Controls on the AR15or AR10 rifle. Made from stainless steel and available for most gas system lengths. Includes roll pin. Made in the USA.
Not sure which gas system your carbine has? Check out the
“Choosing your Gas Control” menu link at the top of the page. Step #2 explains how to determine the length of your gas system.
Gas system measurements (the distance between your upper receiver and your current gas block - NOT the overall length of the tube) are as follows:
- Micro - 2.78 inches from from receiver to gas block journal
- Pistol - 4.3 inches from receiver to gas block journal
- Carbine - 7.3 inches from receiver to gas block journal
- Midlength - 9.3 inches from receiver to gas block journal (shown in the image below)
- Intermediate - 11.18 inches from receiver to gas block journal
- Rifle - 12.6 inches from receiver to gas block journal
- Rifle +1 - 13.6 inches from receiver to gas block journal
**Note: Intermediate-length Gas Tubes have recently been added to our options. There are several versions of intermediate gas systems on the market. The Intermediate Gas Tubes we offer measure 13.65" from tip to tip. This is not the receiver-to-gas-block measurement we reference above and on the "Choose Your Gas Control" page. Please verify the version of Intermediate gas system your carbine uses. Wilson Combat reportedly uses a 13.25" length as their "Intermediate" option. If you need a different version than what we offer, White Oak Armament makes straight gas tubes in custom lengths for a reasonable price.
***Note: Our Micro-Length Gas Tubes measure
5.240" long from tip to tip. This is not the
receiver-to-gas-block measurement we reference above and on the "Choose
Your Gas Control" page. Please verify the version of Micro-length gas
system your carbine uses.
ATTN Washington Residents: Gas Controls and Gas Tubes are sold only as replacement parts for existing firearms. By purchasing these items you are certifying that parts are for repair or replacement and not for conversion. Email us if you have questions on this policy.