Q: What would the dimensions be for the .875 gas block? I want to put it on a WC 18" Urban Super Sniper barrel( .875 at the gas block) with a Rogue Ops hand guard(1.3" ID) and want to make sure it will fit. Thanks in advance for any info! Aaron Milik.

Asked by: Aaron Milik - 1/19/2024
A: Aaron, we’ll have the dimensioned drawings added to the .875” page ASAP. The max OD is 1.275”. A handguard with an ID of 1.3” will be very close.
Was this answer helpful?  5 of 5 Customer(s) found this Answer helpful.
Answer provided by: Administrator (1/27/2024)

Q: Is the .875" ever going to become reality. Been asking now for over a year now.

Asked by: Dan Conley - 9/22/2023
No Answers have been submitted yet.

Q: Any idea when the .875 gas block will be released?

Asked by: Raymond Abounader - 8/22/2023
A:
We don’t have a firm release date yet, but are pushing as hard as possible.

You can keep up with updates here:

https://www.riflespeed.com/RIFLESPEED-Gas-Controls-875_p_55.html

Thank You For Your Interest in RifleSpeed!

Shawn

[email protected]
www.riflespeed.com
https://www.facebook.com/RifleSpeed/
https://www.youtube.com/@riflespeed
Was this answer helpful?  2 of 18 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (8/24/2023)

Q: Any update on progress? Waiting on this for a build im doing.

Asked by: Mark - 6/19/2023
A: We’re validating the first assemblies now. The springs are going to take a bit of tweaking so the release date is still TBD.

Thank you for your interest in RifleSpeed
Was this answer helpful?  5 of 12 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (6/19/2023)

Q: Do you have a expected release date for the .875 adjustable gas block

Asked by: Raymond Abounader - 5/20/2023
A: We are shooting for the end of June. Be sure to get on the waiting list to be notified when they are available.

https://www.riflespeed.com/RIFLESPEED-Gas-Controls-875_p_55.html
Was this answer helpful?  2 of 11 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (5/26/2023)

Q: any update as to estimated date for release and availability?

Asked by: Kyle - 5/10/2023
A: We are shooting for the end of June. Be sure to get on the waiting list to be notified when they are available.

https://www.riflespeed.com/RIFLESPEED-Gas-Controls-875_p_55.html
Was this answer helpful?  2 of 6 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (5/26/2023)

Q: Hello! There is a pending assault weapons ban within Washington state where I currently reside. Unfortunately, they have included parts in the ban. I have been waiting a very long time for your .875 gas blocks be released and I’m concerned that when they are, it will be illegal for me to buy one. Is there any possibility I could get one within the next 1-2 weeks? I know it’s a long shot but it doesn’t hurt to ask. Thanks!

Asked by: Harley Johnson - 4/6/2023
A: We are shooting for the end of June. Be sure to get on the waiting list to be notified when they are available.

https://www.riflespeed.com/RIFLESPEED-Gas-Controls-875_p_55.html
Was this answer helpful?  1 of 5 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (5/26/2023)

Q: Approximate availability on the RS8733?

Asked by: Kevin Thompson - 4/3/2023
A: We are shooting for the end of June. Be sure to get on the waiting list to be notified when they are available.

https://www.riflespeed.com/RIFLESPEED-Gas-Controls-875_p_55.html
Was this answer helpful?  1 of 4 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (5/26/2023)

Q: Will the RS8719 be available? The configurator shows it's what I need but I don't see it offered in the selections.

Asked by: Kevin Thompson - 4/3/2023
A: Current timeline is June.

Thanks for your interest in Riflespeed.
Was this answer helpful?  1 of 4 Customer(s) found this Answer helpful.
Answer provided by: Administrator (4/6/2023)

Q: Any idea on how long these will be out of stock? Also how tall is the block?

Asked by: Waylon - 3/11/2023
A: We are shooting for the end of June. Be sure to get on the waiting list to be notified when they are available.

https://www.riflespeed.com/RIFLESPEED-Gas-Controls-875_p_55.html
Was this answer helpful?  0 of 3 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (5/26/2023)

Q: Do you have an estimate on when the 0.875 gas control will be available?

Asked by: George Lin - 3/6/2023
A: We are shooting for the end of June. Be sure to get on the waiting list to be notified when they are available.

https://www.riflespeed.com/RIFLESPEED-Gas-Controls-875_p_55.html
Was this answer helpful?  0 of 3 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (5/26/2023)

Q: How much longer before the.875 are going to be ready?

Asked by: Marc Guidry - 3/2/2023
A: We are shooting for the end of June. Be sure to get on the waiting list to be notified when they are available.

https://www.riflespeed.com/RIFLESPEED-Gas-Controls-875_p_55.html
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (5/26/2023)

Q: When do you forecast the spring will be back in stock so that you will be able to manufacture this .875 block?

Asked by: Johnson Hoey - 2/8/2023
A: Current ETA is late spring. We do have the initial batch of Wave Springs in from the vendor and will be completing the validation and production release as quickly as possible. Thanks for your patience.
Was this answer helpful?  1 of 3 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/15/2023)

Q: Any idea when the .875 gas systems will be available. I tried adding myself to the waiting list, but it keeps erroring out.

Asked by: Jake - 1/18/2023
A: Current ETA is late spring. We do have the initial batch of Wave Springs in from the vendor and will be completing the validation and production release as quickly as possible. Be sure you are signed in to your customer account when signing up for the waitlist.

Thanks for your patience.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/15/2023)

Q: Any updates on a release date on the rs8733?

Asked by: Adam - 1/18/2023
A: Current ETA is late spring. We do have the initial batch of Wave Springs in from the vendor and will be completing the validation and production release as quickly as possible. Thanks for your patience.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/15/2023)

Q: When will this item be coming back in stock?

Asked by: Nick - 1/15/2023
A: Current ETA is late spring. We do have the initial batch of Wave Springs in from the vendor and will be completing the validation and production release as quickly as possible. Thanks for your patience.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/15/2023)

Q: Any word on new eta for this gas control? This is the last piece of a build that has been waiting long enough to collect dust. Thanks for any info.

Asked by: Kyle - 1/12/2023
A: Current ETA is late spring. We do have the initial batch of Wave Springs in from the vendor and will be completing the validation and production release as quickly as possible. Thanks for your patience.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/15/2023)

Q: When might the .875 models be available? Also, the confirator calculator is not available as far as I can see. Thank you.

Asked by: Jeff - 12/11/2022
A: Current ETA is late spring. We do have the initial batch of Wave Springs in from the vendor and will be completing the validation and production release as quickly as possible. The configurator will be udated with the .875" option as we approach launch. Thanks for your patience.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/15/2023)

Q: When will the .875 blocks be available?

Asked by: Steve Ball - 11/28/2022
A: Current ETA is late spring. We do have the initial batch of Wave Springs in from the vendor and will be completing the validation and production release as quickly as possible. Thanks for your patience.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/15/2023)

Q: Got a rifle build underway, need an .875 adjustable gas block for .308 Proof Research barrel on an AR-10. Any idea when the .875 gas blocks will be available? Its the only part I need to complete the build. Thanks…Boyd

Asked by: Boyd Jones - 11/13/2022
A: Current ETA is late spring. We do have the initial batch of Wave Springs in from the vendor and will be completing the validation and production release as quickly as possible. Thanks for your patience.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/15/2023)

Q: I'm looking to get a couple of these. I see that you have been working on these for some time and people where asking during the summer of 2022. Do you have a projected date yet? Can you give us an update? Do you think instead of delivering in fall that it will move to 2023?

Asked by: Bob - 10/27/2022
A: We are shooting for the end of June. Be sure to get on the waiting list to be notified when they are available.

https://www.riflespeed.com/RIFLESPEED-Gas-Controls-875_p_55.html
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Shawn Coleman (5/26/2023)

Q: i am trying to figure out which model to select and make sure this will fit the barrel please get back to me by my email but preferably by cell at 6785757447 thankyou

Asked by: charlie - 10/4/2022
A: Charlie, thanks for your interest in Riflespeed. The most certain way to determine fitment is to use the Configurator found on the "Choose your Gas Control" page here: https://www.riflespeed.com/Choose-your-Gas-Control_ep_41.html. We also have several YouTube videos that can help on our YouTube channel. The most common issue that prevents fitment is handguard length. You can enter different measurements into the handguard field to see what would work.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (10/4/2022)

Q: When will this be in stock. I need the .875 to complete my suppressed build!

Asked by: Big Los - 9/4/2022
A: The .875 models are new for the fall of 2022.We don't have a firm release date yet, but are working to have them out ASAP. Thanks for your interest in Riflespeed.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Administrator (10/4/2022)

Q: When will these be available?

Asked by: Joshua Duckworth - 8/29/2022
A: The .875 models are new for the fall of 2022.We don't have a firm release date yet, but are working to have them out ASAP. Thanks for your interest in Riflespeed.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (10/4/2022)

Q: What is the weight of the 0.875 gas control model RS8721?

Asked by: Kevin - 7/6/2022
A: Kevin, we don't have final numbers yet. Those are planned for release late summer so we should start getting that data published closer to then. Based on the .750" models you should be looking at approximately 3.5oz. Thanks.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Administrator (7/12/2022)

Q: When will these be available? I would like to purchase 5 of them, do you offer a discount for larger orders/military discount? Tyler

Asked by: Tyler - 7/3/2022
A: We don't have a firm date yet, but are working to have these available around the end of the summer. Be sure to sign up for the waitlist on the .875" Gas Control product page. Thanks for your interest in Riflespeed.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (7/5/2022)