LE/MIL Gas Controls

Question

Q: Do you have one to fit a Ballistic Advantage HD 20" SS brl for a .308? The best way to determine fitment is to use the Configurator found here: https://www.riflespeed.com/Choose-your-Gas-Control_ep_41.html

Asked by: Wayne Walker - 3/24/2023

Q: I have an 8inch 300 BLK with a .750 gas journal and an AERO ATLAS R1 MLOK handguard. Is the Riflespeed adjustable gas block compatible with my setup? Thanks

Asked by: Bill - 3/20/2023

Q: How do I tell or find the barrel diameter?

Asked by: John - 12/31/2022

Q: What is the difference between the LE/MIL and Riflespeed gas systems?

Asked by: Devon Robinson - 10/14/2022

Q: Whats the difference between the mil/LE and the standard version?

Asked by: Paul Blackburn - 10/8/2022

Q: I HAVE A M&P 10 308/7.62 X 51 WITH A 17 INCH TUG PRO # MTU038SSMC HANDGUARD USING THE ORIG. 18 INCH BARREL W/.750 GAS BLOCK DIA. DO YOU MAKE A GAS SETTING KNOB LONG ENOUGH TO REACH THE END OF THE HANDGUARD? i THINK IT WOULD HAVE TO BE ABOUT 6 INCHES LONG. THANKS SO MUCH FOR YOUR HELP REGARDS, JEFF,

Asked by: Jeff Bushrow - 5/3/2022

Q: Having one of your system where there is one or two setting each for suppressed and unsuppressed as well as an off would be nice like in your example LE/MIL offering. I assume a person could achieve the same without the custom markings by memorizing the number each "mode" is achieved at, but the one thing I am not certain of, is does setting "1" equal off? I really would love to be able to change it from the known suppressed/unspressed settings and quickly shut off the gas and back again. Is that achievable with your system? Thank you, Jason

Asked by: Jason van Zomeren - 2/24/2022

Q: Just a few quick questions. Is there a future projection as to when the LE/Mil systems will be back in stock? Can I purchase a LE/Mil system for my personal rife I use on duty? Is there a significant difference between the civilian / LE-Mil model other than the suppression designation? Thanks for your time!

Asked by: Matthew Solari - 1/28/2022

Q: When will these be back in stock

Asked by: Paul - 12/27/2021

Questions about this item? Ask here.

Accepted Answer

The best way to determine fitment is to use the Configurator found here:

https://www.riflespeed.com/Choose-your-Gas-Control_ep_41.html

Accepted Answer

A: With a different handguard, yes.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Administrator (4/6/2023)

Accepted Answer

Here's a helpful video that shows a simple process: https://www.youtube.com/watch?v=HlapqlbH4oo

Accepted Answer

A: https://www.riflespeed.com/LEMIL-Gas-Controls-_p_34.html

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Shawn Coleman (6/3/2023)

Accepted Answer

A: https://www.riflespeed.com/LEMIL-Gas-Controls-_p_34.html

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Shawn Coleman (6/3/2023)

Accepted Answer

Jeff, if your 18" barrel uses a rifle-length gas system then you'll be able to run an RS7533 with a 15" handguard or an RS7543 with a 16" handguard. The 17" handguard is too long and would cover the entire barrel. Thank for your interest in Riflespeed.

Accepted Answer

Jason, the Gas Controls are fully modular. You can select a longer or shorter Plunger to get exactly the level of restriction you want. Setting a Gas Control up so the bolt does not unlock when lower settings are used is very popular. We have an article that covers Plunger selection and performance in the RifleBlog section of the website. Check that out and let us know if you have any other questions. Thanks for your interest in Riflespeed.

Accepted Answer

Matthew, these are not stocked items, but are made upon working with a unit/agency to determine the correct configuration for issued gun/ammo/suppressor. The only difference is the custom markings and the configuration process we go through with the customer. If your department would like to pursue this we'll be glad to work with you. Email us through the contact page or support@

Thanks for your interest in Riflespeed!

Accepted Answer

LE/Mil Gas Controls are not a stock item. These are available by order from a department or unit with a minimum quantity required and are marked after a validation process using the arms and ammunition issued to the unit members. Our Standard Gas Controls are all in stock for immediate shipment. Thanks for your interest in Riflespeed.

LE/MIL Gas Controls

Related Items

Accessories

Mailing List