Spare Control Knobs (only) for
RS62/RS75 Riflespeed Gas Controls. These install in place of the current Control Knob on your
RS62/RS75 Gas Control Assembly. These are the same Control Knobs that are included with each
RS62/RS75 Gas Control assembly. If you want to switch do a different length you can swap one of these with your current Control Knob. These are only compatible with the
RS62/RS75 Gas Controls. RS87 Spare Control Knobs may be
purchased HERE.
*The Control Knob models #0215 and #0208 are planned for late-spring release. You can preorder them now, but they will not ship until the RS7534 and RS7544 are released. Keep an eye on this page and our social media accounts for updates.
The models RS7519 and RS6219 use the 0.750 inch Control Knob #0200
The models RS7521 and RS6221 use the 0.950 inch Control Knob #0201
The models RS7524 and RS6224 use the 1.290 inch Control Knob #0213
The models RS7533 and RS6233 use the 2.160 inch Control Knob #0202
The models RS7536 and RS6236 use the 2.500 inch Control Knob #0207
The models RS7534 and RS6234 use the 2.230 inch Control Knob #0215
The models RS7543 and RS6243 use the 3.160 inch Control Knob #0203
The models RS7544 and RS6244 use the 3.230 inch Control Knob #0208
The models RS7548 and RS6248 use the 3.660 inch Control Knob #0205
The models RS7558 and RS6258 use the 4.660 inch Control Knob #0205
The models RS7559 and RS6259 use the 4.700 inch Control Knob #0216
Again note; these are spare Control Knobs for the RS62/RS75 Gas Controls only, not the entire assembly. These are replacement or repair parts. You are selecting and purchasing ONE Control Knob. Please note the sizing information above. Made in the USA.
